Features
1. KGBF-6000A18V silicon controlled electrolysis power supply adopts DSP for digital control.
2. Double channels are available for hot spare, which makes this SCR power supply switch without stop and disturbing.
3. It adopts SCR 6-pulse rectification mode. There are 6KV, 10KV, 20KV and 35KV incoming lines for voltage regulation.
4. The rectifier transformer of this electrolysis power supply can carry out 9 to 27 grade on-load voltage regulation (coarse adjustment) and secondary side SCR regulates phase shifting voltage (accurate adjustment).
5. Local control and remote control can be converted mutually. This SCR power supply can choose constant current or constant voltage operation mode.
6. KGBF-6000A18V silicon controlled electrolysis power supply use CAN BUS, PROFIBUS, INDUSTRY ETHERNET, RS485 and RS232 optical fiber for communication.
Application
This electrolytic SCR power supply is suitable for nonferrous metal electrolysis refining (copper, zinc, nickel, lithium, lead, etc.), copper electrolysis, aluminum electrolysis, rare earth electrolysis, salt water electrolysis, chemical electrolysis, etc. KGBF silicon controlled electrolysis power supply can also be used for electrolytic polishing, electrolytic brightening, electrochemical polishing, electrolytic oxidation, plasma electrolytic oxidation, electrolytic iron, electrodeposited copper foil, electrolytic foil, electrolytic copper foil, etc.
Technical Parameters
Name
|
KGBF-6000A18V Electrolytic SCR Power Supply
|
Input Power
|
AC380V/415V/460V 3 Phase
|
Output Current
|
10000A (0-10000A continuously adjustable)
|
Output Voltage
|
DC 4V (0-4V continuously adjustable)
|
Rated Output Power
|
40 kW
|
Control Mode
|
Constant current mode or constant voltage mode can be selected.
|
Power Factory
|
0.85
|
Ripple
|
less than 5% at rated voltage
|
Constant Current Control Accuracy
|
≤ ± 1%
|
Protection Grade
|
No less than IP54
|
Protection Function
|
-Over/Low Voltage Protection -Over/Low Current Protection -Short Circuit Protection -Over Temperature Protection -Lack Water Protection
|
Drawing of KGBF Silicon Controlled Electrolysis Power Supply
1. DC output automatic steady current accuracy is ≤ ±1%.
2. Trigger pulse asymmetry of this SCR power supply is ≤ 0.1°.
3. Pulse phase-shifting resolution is ≤1µs.
4. Rectifier transformer and thyristor rectifier in main circuit adopts cophase counter parallel connection technology, which greatly reduces eddy current loss of accessories.
5. With PLC colorful touch screen, the operation interface is flexible and has a good vision. It can timely record all kinds of parameters and historical curves of SCR electrolysis power supply’s operation.
Lantytk® Corp has a long history of over 50 years in R&D and manufacturing electrolytic SCR power supply in China. In addition to SCR electrolysis power supply, we also produce pulse silicon controlled reversing electroplating power supply, inverter soft switch and pulse electroplating power supplies. Our products have been exported to USA, Germany, Australia, Singapore, India, Brazil, Iran, Vietnam, Kazakhstan, etc.